Tritón nan

Welded cabinet with removable side panels and rear cover, IP20, capacity 400 kg

A universal cabinet for data and telecommunication purposes. Sufficient capacity for common applications, a large selection of sizes and options together with a wide selection of accessories and excellent development make it the best selling cabinet in our range.

Rigid construction
RMA has a robust welded construction. High quality processing and the newest technologies ensure a perfect look of the cabinet.

Flexible door opening
The hinge system allows the door to open almost 180°. The door can be easily removed and re-mounted to change the direction of opening.

Triton handles
We manufacture our own handles for the free-standing cabinets. By changing the plastic module (not included), a traditional or semi-cylindrical lock insert can be used.

Adjustable vertical rails
Vertical 19” rails can be adjusted freely in any depth of the cabinet. This simplifies mounting of the device and configuration of connecting cables.

Removable side panels and rear cover
RMA has a welded frame and removable side panels. These are fixed as standard to the frame using a lock with the same key as the door and rear cover.

Door for fan units
With this cabinet type, it is possible to order a special metal door ready for mounting RAx-CH-X0x-X3fan units.

Break-out blanking panels
Entry openings for cables in the rear part of the cabinet are covered with breakout-type blanking panels. It is possible to use a blanking panel with a brush in cable opening to avoid dust penetration. The fringe edge serves to protect cables from damage (both are parts of the cabinet supply).

Opening for a fan unit
A large opening covered with a breakout-type blanking panel enables mounting and removal of the Triton fan unit from outside of the cabinet without a need of using screws.

Castors, levelling feet
Prepared for mounting castors and levelling feet.

The back side of the cabinet
On the rear cover of the cabinet are two cable openings covered with breakout panels. One is at the top and one at the bottom of the rear cover. Other cable entries are on the ceiling and the base of the cabinet.

Perforated frame
The RMA cabinet has a perforated frame to ensure cooling air has access to the equipment inside. Cooling can be augmented by installing fan units.

Bonding
All removable parts are bonded together according to the relevant standards.

Flex frame (for cabinet of 800 mm width)
This system enables sliding vertical rails to be installed in a span of 19", 21" and 23", just as needed for the equipment being used.

Middle pair of vertical rails
For cabinets deeper than 800 mm a third pair of vertical rails is supplied. An open profile means that the middle rails do not limit installation of deeper devices.

Swing frame
It is possible to equip the RMA and RZA cabinets with the swing frame with loading capacity 100 kg. Maximum available depth of the 19" accessories is 330 mm.

• 19" free-standing cabinet with IP20 protection.
• Cabinet includes 4 sliding vertical rails for device mounting (6 rails for cabinets deeper than 800 mm).
• Cabinet construction: Welded steel frame with removable side panels. Optional single or double doors in variants fully-metal, perforated (80 % and 86 % air permeability) or glazed with safety tempered glass 4 mm. They can be on the front or back of the cabinet.
• Max. permissible load of the door is 20 kg.
• Min. thickness of the surface finish is 65 µm.
• These cabinets are intended for installation data and telecommunication devices and their distribution systems.
• The frame of the cabinet and all the removable parts (side and rear covers, doors…) are bonded with patch cables that have to be properly fixed and inserted into connectors throughout the period of use of the cabinet.
• There is one M8 screw placed on the bottom part of the cabinet to connect the bonding.
• Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet.
• Material: Safety hardened glass 4 mm thick, Steel sheet

• Key - rear and side panels 2x
• Key - front door 2x
• Captive nut M6 16x
• Blanking panel with brush 1x
• Fringe edge 1m
• Adjustable feet 4x
• Nut M10 4x