Tritón B-goods Triton RMA-37-A81-BAX-A1 19" network cabinet 37U, 800x1000mm, glass door, black

Description

B-goods with transport damage, see pictures
The following damage:

• Paint chipping on the front below the door handle
• Paint chipping on rear side recte upper corner
• Back panel dented in the upper right area

Universal cabinet for data and telecommunication purposes. Sufficient capacity for common applications, a large selection of sizes and options together with a wide range of accessories and perfect processing. High quality processing and the newest technologies ensure a perfect look of the cabinet. The hinge system enables almost 180° wide opening of the door. The door can be easily removed and mounted for a change of the door opening direction. Vertical 19" rails can be adjusted freely in any depth of the cabinet. This simplifies mounting of the device and configuration of connecting cables. RMA is a cabinet with a welded frame and removable side panels. These are standardly fixed to the frame using a lock with unified key in the same way as the rear cover.

CABINET REAR COVER
Removable side and rear covers are secured with a key operated locks the same as the front cover.

BREAK-OUT BLANKING PANELS
Entry openings for cables in the rear part of the cabinet are covered with breakout-type blanking panels. It is possible to use a blanking panel with a brush in a cable opening to avoid dust penetration. The plastic frame serves to protect cables from damage (both are parts of the cabinet supply).

CASTORS, NIVELATION NIBS
Preparation for mounting of castors, heavy-load castors and nivelation nibs.

FLEX FRAME (valid for 800 mm cabinet width):
The system enables sliding vertical rails installation in a span of 19", 21" and 23" strictly up to requirements of the applied technology.

DESCRIPTION, PURPOSE OF USE

• 19" free-standing cabinet with IP20 protection
• Cabinet includes 4 sliding vertical rails for device mounting (6 rails for cabinets deeper than 800 mm).
• Cabinet construction: Welded steel frame with removable side panels / Single or double doors in variants fully-metal, perforated (80% air permeability) or glazed with safety tempered glass 4mm. They can be on the front or back of the cabinet
• Max. permissible load of the door is 20 kg.
• Min. thickness of the surface finish is 65 micrometer
• These cabinets are intended for installation data and telecommunication devices and their distribution systems
• The frame of the cabinet and all the removable parts (side and rear covers, doors…) are connected with earthing cables that have to be properly fixed and inserted into connectors during all the time when using the cabinet.
• There is one M8 screw placed on the bottom part of the cabinet as an earthing main point.
• Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet.

OPERATION CONDITIONS
Operation environment:

• Office
• The cabinet is not intended for outdoor installations and for installations in environment that can influence negatively the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings).

Must be protected against:

• Mechanical damage
• Improper manipulation
• A different usage than the cabinet is intended for

Improper manipulation is especially:

• Overloading (maximum recommended load exceeding).
• Device installation that can influence negatively operation and function of the cabinet or the installed equipment.
• Change of the construction or design of the cabinet.

INSTALLATION OF THE CABINET

• To ensure the maximal recommended load, it is necessary to distribute the load equally.
• Place the cabinet on a flat floor and compensate an eventual small roughness with the nivelation feet.
• To avoid dust penetration in a case where cables lead through some of the cable openings, it is possible to seal it with a blanking panel with a brush or secure by plastic frame (both are part of the cabinet supply).

ENVIRONMENT PROTECTION

• All parts are made of recyclable materials and after its discard, it is necessary to dispose the cabinet according to valid regulations.

• Supply includes: 2x Key - rear and side panels, 2x Key - front door, 16x Captive nut M6, 1x blanking panel with brush, 4x Adjustable feet, 4x Nut M10
• Material: Safety hardened glass 4 mm thick, steel sheet